PCD/FSB/2166 - Trend PCD Fibre Cement Circular Saw Blade 216mm x 30mm x 6T
A range of polycrystalline diamond blades for cutting a wide variety of ultra-hard and abrasive materials. For use in circular, plunge, table and mitre saws, Trend PCD Fibre Cement blades are exceptionally durable and retain their cutting edge for longer than TCT alternatives. Ideal for AQUAPANEL®, HardieBacker®, gypsum, composite decking & cladding, laminate flooring, fibre & glass reinforced polymer and compact laminate worktops.
- Precision EDM-ground polycrystalline diamond (PCD) tips for optimum edge retention and cut quality in abrasive sheet materials.
- Triple chip ground (TCG) tooth form with +12° hook for a clean, controlled, efficient cutting action through tough materials.
- Precision ground alloy steel plate to maintain flatness.
- Body hardened and tempered to minimise deflection under load.
- Expansion slots improve heat dissipation to minimise vibration, prevent kick-back and improve cut quality.
- Etched blade information to EN847 safety standard.
- Reamed Bore ensures precise spindle fit.
- Compatible with Bosch Pro GCM 8 SDE, Bosch Pro GCM 8 SJL, Bosch Pro GCM 18V-216, Bosch Pro GCM 18V-216 D, Bosch Pro GCM 18V-216 DC, Bosch Pro GCM 305-216 D, Bosch Pro GCM 800 SJ, Dewalt DCS777, Dewalt DW712, Dewalt DWS771, Dewalt DWS773, Dewalt DWS774, Dewalt DWS777, Einhell TC-MS 216, Einhell TC-SM 216, Einhell TE-SM 216 Dual, Erbauer EMIS216S, Erbauer EMIS216S18-LI, Festool KS 60 E, Festool KSC 60 EB, Festool SYMC 70 EB, Hikoki C8FSE, Hikoki C8FSHG, Makita LS002G, Makita LS0815F, Makita LS0815FL, Makita LS0816F, Metabo KGS 18 LTX 216, Metabo KGS 216 M, Metabo KGSV 72 XACT, Metabo KS 216 M, Milwaukee M18 SMS216, Milwaukee MS 216
PCD Sawblades
Shop a variety of Polycrystalline Diamond Tipped sawblades with different tooth forms, tooth counts and hook angles for circular, mitre and plunge saws. Designed to cut composite decking, fibre cement board/cladding, carbon fibre-reinforced polymer, glass-reinforced plastic, compact laminate and MDF.
Features
Polycrystalline Diamond (PCD) Tips for precision EDM-ground for optimum edge retention and cut quality.
The Triple Chip Ground Profile with +12° Hook for a clean, controlled, efficient cutting action through tough and brittle materials.
Laser Cut Alloy Steel Plate is hardened and tempered to minimise deflection.
Expansion Slots reduce noise and vibration and assist with heat dissipation.
Reamed Bore ensures precise spindle fit.
Etched Blade Information to EN847 safety standard.
Detail
- Polycrystalline Diamond (PCD) Tips precision EDM-ground for optimum edge retention and cut quality in the most abrasive sheet materials.
- Triple Chip Ground Profile (TCG) with +12° Hook for a clean, controlled, efficient cutting action through tough and brittle materials.
- Laser Cut Alloy Steel Plate is hardened and tempered to minimise deflection under load for assured accuracy.
- Expansion Slots reduce noise and vibration, and assist with heat dissipation to prevent warping to maximise cut quality.
- Etched Blade Information to EN847 safety standard.
- Reamed Bore ensures precise spindle fit.
Featured Products
Discover more about Trend Sawblades
Sawblade Range Information
Sawblade Products
Sawblade Videos
- D1
- 8 1/2 inches
- D1
- 216 mm
- Bore
- 30 mm
- Kerf
- 2.4 mm
- Plate thick
- 1.6 mm
- No. of Teeth
- 6
- Tooth form
- TCG
- Hook
- 12 degrees
- Quick Selector No.
- C19.2
- Cut Finish
- Coarse
- Max rpm
- 6000
It is recommended that the blade should not project more than 1mm out of bottom of substrate.
no spare products
Videos
Trend PCD Saw Blades
This video shows the key features of our PCD Saw Blades.
Circular Sawblade Maintenance Guide Video
Trend Circular Saw Blade Maintenance Guide.
