Group

CR/PDS1X1/2TC - Panel door set ogee

CR/PDS1X1/2TC
£146.60
£122.17

A panel door set consisting of a Easyset profile scriber and panel raiser cutter. Supplied in a storage case.

    Shank Diameter
    1/2 inch
    R
    4 mm
    D
    41 mm
    B
    22 mm
    C
    17 mm
    C2
    6.35 mm
    OL
    90 mm

    Panel raiser:

    R
    12 mm
    D
    50 mm
    C
    16 mm
    OL
    50 mm
    Timber thickness min.
    18 mm
    Timber thickness max.
    22 mm
    Product Image Product Ref Diagram No Description Quantity Required Price for 1
    C155X1/2TC - Ogee profile scriber set C155X1/2TC

    The classic method of producing cabinet panelled door and drawer fronts is made easy with these Profile Scriber sets. With the combination type, components are re-arranged on the arbor to cut the profile or the scribe.

    • Cuts both parts of the joint by only changing the cutter height. No reassembly of the tool is required so saving time.
    • Router table use only. 1/4 inch and 8mm shanks should only be used with a medium or heavy duty router. For certain routers the aperture in the base may need to be enlarged. A workholding device should be used when cutting the scribe cut on the rail ends. The cutting edges should be staggered to each other. When using Easyset cutters take several passes.
    £74.21
    C173X1/2TC - Large panel raiser radius 12mm C173X1/2TC

    Panel raiser cutters for producing the panel for cabinet panelled doors, tool matches our range of profile scribers. Suitable for use on natural timber and MDF.

    • For use in a router table only.
    • Take several passes, increasing the depth with each pass.
    • Must be used in a stationary variable speed router either mounted overhead or inverted in a router table at a reduced speed. For use on natural timber and MDF.
    • Stationary use only.
    • Can be used for curved panels if a copy pin is used.
    £58.35

    Product Questions

    Write Your Own Question
    Your Question: