BS/JIG/PRO - Professional Belfast Sink Jig

A universal routing jig for the installation of Belfast, Butler and Farmhouse sinks in timber and compact laminate worktops. The dual-purpose jig is used to cut the main worktop aperture and machine a matching drip groove on the underside of the worktop to protect adjacent cupboards.

• Fully-Adjustable Inset Positions to accommodate sink recesses from 340 to 500mm deep.
• Bridging Pin System to accommodate oversize sink widths up to 1000mm.
• Alignment Gauges for fast and accurate positioning of the jig directly to cut lines.
• Single Guide Bush Design utilises a standard 30mm guide bush to cut both the sink aperture and drip groove.
• Drip Groove T-Gauges position the jig quickly and accurately when cutting the underside drip groove.
• R30mm and R50mm Corner Options for a clean, professional finish at the front of the sink recess.