CNC Machining FAQs

All Smartbench variants will work with Macbooks however they will need to use https://www.parallels.com/uk/products/desktop/ or a similar product to use Smart Transfer and some CAD apps like Vectric.

Yes it does have continuous movement.

The movement range on the Trend CNC Smart Machining Centre is:

CNC/SMART1300: x axis 860mm y axis 1420mm z axis 90mm.

CNC/SMARTFAST: x axis 860mm y axis 1420mm z axis 90mm.

CNC/SMARTPLUS: x axis 860mm y axis 920mm z axis 90mm.

The weight of the CNC Smart Machining Centre is:

CNC/LITE/T10: 200KG

CNC/SMARTPLUS: 350KG

CNC/SMART1300: 420KG

CNC/SMARTFAST: 350KG

The CNC SMART requires one 240 volt supply to operate. Two of 240 volt supplies are required if using a vacuum pump.

Yes this is possible but the cost may be prohibitive.

This is possible at the time of installation and not as a retro fit.

The HF motor unit has variable speed control up to 18000 rpm.