Sawblade FAQs
Sawblade FAQs
We sell a whole range of bushing washers to suit all bore sizes, fit the bushing washer into the bore of the sawblade.
Depends on the diameter and bore size but one of the blades from the Aluminium and Plastic section (triple chip tooth grind) will cut the material.
No. Our sawblades/cutters are not suitable for this type of material.
No. We have a range that are suitable for use on non-ferrous metals (metals without iron content).
Yes, the BJB/100S or CR/BJB100 are the equivilent Trend blades.
We would recommend our AP triple chip blades for cutting Corian it has a -5 degree tooth rake and is ideal for this material although longevity of the blade is reduced due to the abrasive nature of the material.
Depends on the diameter and bore size but one of the blades from the Aluminium and Plastic section (triple chip tooth grind) will cut the material.
The Combination blades will cut Plasterboard and Stone fibre board.
Depending on diameter and bore size but one of the blades the Aluminium and Plastic section will cut the material with some PTFE spray (TRENDICOTE) as a Lubricant.
Araldite two part formula.
When the flats of a sawblade’s teeth are angled negatively unlike a conventional positive hook shape.
Yes. A blade with a negative hook needs to be used to minimise ‘pick up’ and ‘snatching’.
