We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Frequently Asked Questions
When using the Trend Stair/Jig A the cutters available for the required Tread thicknesses come in both RH and LH Rotation, which should i choose?
When using these cutters with the Trend Stair/Jig A always use the RH Rotation cutters, the LH Rotation cutters are for Stair trenching machines only.
Created by Trend Support Team
Was this article helpful ?
Category
- Routers FAQs
- Router Cutters FAQs
- Safety & PPE FAQs
- Tool Storage FAQs
- Routing Workshop Jigs FAQs
- Router Tables FAQs
- Routing On-site Jig FAQs
- Routing Accessories FAQs
- Dust Extraction FAQs
- Power Tool Accessories
- Drilling FAQs
- Trend Snappy FAQs
- Clamping FAQs
- Abrasives FAQs
- Sawblade FAQs
- Planer, Jigsaw & Multitool FAQs
- Sharpening & Tool Care FAQs
- Measuring & Hand Tools FAQs
- CNC Machining FAQs
- Catalogues & Books FAQs
- Spare Parts FAQs
Tags
- Routing (34)
- Clamping (1)
- product (6)
- (29)
- Compatibility (25)
- Sharpening (2)
- Sharpening (3)
- Screws (3)
- Countersinks (3)
- Substances (3)
- Filters (8)
- Materials (10)
- Radius (4)
- Replacement (3)
- Jointing (14)
- Kitchen Fitting (10)
- Cutting Speed (1)
- Smartbench (1)
- Scribing (1)
- Shipping (1)
- Respirators (1)
- Repair (1)
- Life expectancy (1)
- Respirators (16)
- Dividers (1)
- Batteries (4)
- Biscuit Jointing (4)
- Jig Making (1)
- CNC Machining (7)
- Templating (1)
- Repairs (1)
- Holding The Workpiece (1)
- Cutter Sets (1)
- Bearings (1)
- Mortise & Tenon (1)
- Auger Bits (1)
- Flat Bits (1)
- Drilling (1)
- Hex Keys (1)
- Plug Cutters (1)
- Drill Bit Guides (1)
- Door Fitting (18)
- Grub Screws (1)
- Kitchen Fitting (2)
- Cleaning (3)
- Accessories (1)
- Power Wattage (1)
- Container Volume (1)
- Noise Rating (1)
- Cleaning (2)
- Templates (1)
- Stair Jig (4)
- T Slot Track (1)
- Parallel Groove (1)
- Bore Size (1)
- Modification (1)
- Maintenance (6)
- Modification (3)
- Rebating (1)
- Jointing (2)
- Torx Screw (1)
- Line-up Pin (3)
- Guide Bush (4)
- Materials (3)
- Replacement (1)
- Countersinks (1)
- Thread (2)
- Measurements (1)
- Angle (1)
- Routing (1)
- Contents (1)
- Door Fitting (1)
- storage (1)
- guide bushes (1)
- worktop (6)
- collet (1)
- spindle moulding (1)
- bearing (1)
- rpe (2)
- hinges (2)
- door (1)
- Frames (1)
- Hinges (2)
- Worktop (6)
- Filter (1)
- Protection (1)
- Dust Extractor (2)
- Warranty (1)
- Router Table (2)