Frequently Asked Questions

The maximum power tool wattage on the T30 is 2000 watts.

The T30 cartridge filter dimensions are OD 151mm, ID 115mm and length 187mm.

The container volume is 34 litre dry and 25 litres wet.

Net capacity is 12.6 litres.

The T30AF has the filter T30/5 0.5 micron filter and T30/3 pre filter fitted in place of T30/6 12 micron filter.

The noise is rated at 85db(a) when in use.

It can be used for normal cleaning operations. But for fine dust a bag should be used to aid cleaning out the unit and prolong the machines life. The paper bag also increases the life of the cartridge filter.

The WP-T35/041 bayonet fitting can be easily removed by using a flat-bladed screwdriver pushed into the two tabs on each side of the fitting this releases the nozzle from the hose.

We no longer keep bags for the T30 there is a company that still supplies an equivalent online. https://www.vacuumcleanerbags.co.uk/Trend__T30AF-vacuum-bags-1.html

Yes. with the use of part number CRT/3.

No, the T30/22 replaces the hose that comes with the T30 and will fit straight onto the CRT tables.

It can be used for normal cleaning operations. But for fine dust a bag should be used |to aid cleaning out the unit and prolong the machines life. The paper bag also increases the life of the cartridge filter.

Some of the accessories will fit, but some will not. The T31 tubes, floor kit, crevice tool, round brush and power tool stepped spout will fit the T30 hose spout and tubes and vice-versa. The T31 no foam filter, cartridge filter, dust bags will not fit T30 and vice-versa. The T31 hose with a bayonet is too tight a fit into the T30 container and may split the outlet on T30.